BMBRC - PACKING NO. 1359
- MSDS: BMBRC
- Manufacturer: PALMETTO INC
- Product Name: PACKING NO. 1359
- National Stock Number: 5330-00N025978
Product Identification
Product ID:PACKING NO. 1359
MSDS Date:01/18/1990
FSC:5330
NIIN:00N025978
MSDS Number: BMBRC
Responsible Party
DENTON, MD 21629
US
Emergency Phone: 301-479-2244
Info Phone: 301-479-2244
Cage: 72902
Contractor
Telephone: 301-479-2244
Cage: 72902
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IF OVEREXPOSED TO PTFE FUMES-
POLYMER FUME FEVER. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:FLU-LIKE CONDITIONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR AND CONSULT PHYSICIAN. EYE:
FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES .
INGESTION: CALL MD IMMEDIATELY . SKIN: FLUSH WITH COPIOUS AMOUNTS
OF W ATER .
Fire Fighting
Flash Point Method:OC
Flash Point:610F,321C
Extinguishing Media:WATER, FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:PTFE WILL BURN IN AN ATMOSPHERE OF 100%
OXYGEN WITH IGNITION SOURCE PRESENT-SOME SMOKE PRODUCED.
Accidental Release
Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN CLEAN, DRY AREA AWAY FROM
FLAME OR EXCESSIVE HEAT AND AWAY FROM STRONG OXIDIZERS.
Other Precautions:ANY USE OF PRODUCT IN COMBINATION WITH ANY OTHER
PRODUCT OR ANY OTHER PROCESS IS RESPONSIBILITY OF THE USER.
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED BY COMPANY POLICY.
Work Hygienic Practices:AVOID CONTAMINATING TOBACCO WITH PTFE;
DEPENDING ON USE OF PRODUCT, VENTILATION & PROTECTIVE EQUIPMENT MAY
BE REQUIRED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Appearance and Odor:GREY/BLACK/YELLOW-ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, MOLTEN, ELEMENTAL ALKALI METALS & INTERHALOGEN
COMPOUNDS.
Stability Condition to Avoid:DIRECT FLAME.
Hazardous Decomposition Products:CARBON DIOXIDE ABOVE 600F-HYDROGEN
FLUORIDE & PERFLUORO CARBON OLEFINS ABOVE 827F.
Disposal
Waste Disposal Methods:1. LANDFILL. 2. COMPLETE COMBUSTION AND REMOVAL
OF GASEOUS PRODUCTS BY ALKALINE SCRUBBING IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.